Hydraulic Roll Marking Machines

Dimensions for Model 175 & 575 MPC Hydraulic Roll Markers

Model 175-575 Drawing PDF

Model 175-575 3D CAD**

**3D PDFs need to be downloaded and reopened in Adobe Reader on a desktop for full 3D functionality to work. If viewed as a PDF in a web browser the image will not move or rotate 360 degrees.**

Download Adobe Reader here for free

Features & Benefits:

• In-line marking or automated applications
• Microprocessor controls all machine actions.
• Can operate as a roll marker or provide press marking action.
• Anti-tie-down dual hand controls ensure operator safety.
• Non-standard options available for up to 32” die space.
• Open back for marking long parts.

Features & Benefits:

• installed individually at any in-line production, assembly or inspection station.
• mounted in series on production machines, conveyors and transfer systems.
• can be used as bench-style machines.
• Vertical, horizontal or upside down mounting.
• operated by anti-tie-down dual hand controls or by optional limit switch.
• fixtured with standard SCHMIDT tooling and accessories.
• equipped with remote hydraulic units

This custom 575 roll marking machine was designed with a protective guard and light curtain for operator safety. It also features a deeper table and cross slide to accommodate a larger marking surface.

This 175 roll marking machine used for marking railroad wheel bearing, was designed with an extended die space to accommodate the larger diameter parts.

This custom 175 roll marking machine, used for marking bearing races, was designed with a part feeding chute conveyor. It also has a retractable mandrel that locates and holds the part during the marking process.

This 175 roll marker, used for marking rifle barrels, was incorporated with an adjustable fixture to accommodate the various rifle barrel draft angles and lengths.

This custom 477 hydraulic roll marking machine was designed to mark ordinance shells. The marks were simultaneously placed 180 degrees apart.

This custom hydraulic roll marking machine was implemented into a cylinder production line. The roll marker was designed to accept various sized cylinders, roll mark 5 lines of information, and then reposition the cylinder to continue down the production line.

Roller Bearing Cradle:

Roller bearing cradles are fixtures that can be mounted on the tables of roll markers to support and locate solid round parts or heavy walled tubing for peripheral marking. Parts are loaded on these fixtures manually, and peripheral impressions are made using flat dies or straight type holders mounted in a machine slide. Dies roll over the periphery of the part causing it to rotate while marking. Standard cradles are carried in stock.

Special Cradles: We also make custom cradles to your specs.

Standard Roller Bearing Cradles

Round (Knurl) Support Carriage:

Knurl support carriages are designed to hold and support round type holders and solid lettering knurls. The carriage is mounted to the machine die slide for roll marking flat parts. Several sizes are available in stock in both t-slot and dovetail mounts.

Stud Arbor Fixture:

Hollow round parts often are supported on arbors for marking. Plain Stud Arbor Table Fixtures are suitable where marking may appear at any point on the periphery. When a range of sizes needs to be marked, interchangeable stud arbors can be furnished for the same fixture base. A Spring Return Type Arbor is required for marking at the same starting point for each part. The spring return feature allows the stud arbor to return to its correct starting position after each marking cycle.